Filter
Top Products
Have the screen colors
become strange after
running a program or due
to a crash between
applications?
Reboot the computer.
Has the video card been
set properly?
Set the video card by referring to the video card
manual.
The screen
suddenly has
become
unbalanced.
Have you changed the
video card or the driver?
Adjust screen image position and size using the OSD.
Have you adjusted the
resolution or frequency to
the monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
The screen is
out of focus or
OSD cannot be
adjusted.
Have you adjusted the
resolution or frequency
on the monitor?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
LED is blinking
but no images
on the screen.
Is the frequency properly
adjusted when checking
the Display Timing on the
menu?
Adjust the frequency properly by referring to the video
card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ
from product to product.)
There are only
16 colors
shown on the
screen.
The screen
colors have
changed after
changing the
video card.
Have the Windows colors
been set properly?
Windows ME/2000/XP:
Set the colors properly at the
Control Panel
Display Settings
.
Has the video card been
set properly?
Set the video card by referring to the video card
manual.
There is a
message that
reads
"Unrecognized
monitor, Plug &
Play (VESA
DDC) monitor
found".
Have you installed the
monitor driver?
Install the monitor driver according to the Driver
Installation Instructions.
See the video card
manual to see if the Plug
& Play (VESA DDC)
function can be
supported.
Install the monitor driver according to the Driver
Installation Instructions.
Check when
MagicTune™
does not
function
properly.
MagicTune™ feature is
found only on PC (VGA)
with Window OS that
supports Plug and Play.
* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance ->
System -> Hardware -> Device Manager -> Monitors -
> After deleting Plug and Play monitor, find 'Plug and
Play monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor.
When you have a problem with the graphic card, visit
our website to check the compatible graphic card list
provided.
http://www.samsung.com/monitor/magictune
MagicTune™
doesn't work
properly.
Have you changed your
PC or video graphic
card?
Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magictune
Did you install the
program?
Reboot the computer after installing the program for
the first time. If a copy of the program is already
installed, remove it, reboot the computer, and then
install the program again. You need to reboot the
computer for it to operate normally after installing or