Filter
Top Products
Rev. 1.00
-17-
BCD-1000 Series
English
6-1-3 Installation Instructions
STEP1. Turn the computer system power off.
STEP2. Connect the Display Cable to the RS-232 Port of the Computer.
STEP3. Connect the DC Power source by the appropriate DC Power adapter.
STEP4. Turn on the computer and the power supply unit, the display will be on and ready
for receiving data.
6-1-4 Signal Assignments (Cable-end DSUB)
1 2 3 4 5 6 7 8 9
pin Name NC RXD TXD DTR GND DSR RTS CTS NC
Short
Connection
6-1-5 DC Power Jack
MAX 300 ~ 1350mA. +5VDC ~ +24VDC.
NOTE※
To use 5V DC Power source should modify the PCB Circuit in factory.