How to operate
How to store a disc
How to clear a disc
How to operate/Disc care and keeping method
The following instructions are for the user safety and the prevention of property damage.
Read instructions carefully and use a product correctly.
Boot a computer by pressing the power button.
After booting, open the disc tray by
pressing the Open/Close button.
Insert a disc(CD/DVD), and close the disc tray
by pressing the Open/Close button.
●
The operation indicating light is turned on.
Play a disc(CD/DVD).
● Do not store it directly to the sun.
● Store it vertically at the even place which is well ventilated.
● Do not scribble or put a label on a disc.
● Do not impact to a disc excessively or drop it.
● Hold the edge of disc
instead of touching the
surface of disc.
● Clear a disc lightly from the center
of disc to the outer side with the soft
cloth.
● Start to play after installing DVD software mpeg program which is provided with the accessories on the PC.
To play a DVD title/Video CD title
Ú
If you touch the surface of disc or a foreign material or a dust is covered on the disc, it could not be operated well.
Ú
If a drive is mounted vertically, it is impossible to use 8cm of mini disc because it is not fixed.
1
2
3
4
A video file is not played.
It cannot recognize a DVD Writer.
The speed of a PC slows after
installation of DVD Writer.
●
Check it after installing the newest codec program.
●
Use the newest codec file to watch the movie file.
Select the codec program that supports the related compressing type and
install it.
● Check the connection of power cable and S-ATA cable.
● Change the connection of S-ATA cable.
A disc tray is not opened.
●
Check the connection of a power cord or power cable.
●
If it is not opened at the state of power on, reboot the PC and open it by
pressing the Open/Close button. But still it is not opened, turn the power off
and open it pushing by inserting a thin pin(clip) into the emergency hole.
A screen is cut and a speed is
slow when playing a video with
S/W MPEG.
●
Reduce a play screen size.
●
Check the resolution of display and correct it to the proper resolution in
the control panel of windows.
A disc is not recognized and a
speed is slow.
●
Check a DISC condition and use it after cleaning.
Easy checks
9 10
SH-S203S(내장형)-ENG.indd 12-13SH-S203S(내장형)-ENG.indd 12-13 2007-10-30 오후 1:43:482007-10-30 오후 1:43:48