Filter
Top Products
Installation and Connection 2-3-1
The projection distance is the horizontal distance between the projector and the screen.
2. When your U300 projector is installed in a location where the projection distance matches the screen diagonal length, you will
enjoy a clear screen with no distortions (keystone).
2-3-1 Connecting with a PC
1. Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2. When connections are all completed, connect both power cords of the projector and the PC.
3. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable.
This product supports plug and play and therefore, if you use Windows XP, you do not need to setup the driver on your PC.
Using the Projector
1. Turn on the projector and press the [SOURCE] button to select <PC>.
If the <PC> Mode is not available, make sure the PC video cable is properly connected.
2. Turn on the PC and set the PC Environment when necessary.
3. Adjust the screen.(Auto Adjustment)
2-3-2 Setting up the PC Environment
Check the following items before connecting your PC to your projector.
70” 2959mm / 116.5
inches
1422mm / 56.0
inches
1067mm / 42.0
inches
1778mm / 70.0
inches
80” 3386mm / 133.3
inches
1626mm / 64.0
inches
1219mm / 48.0
inches
2032mm / 80.0
inches
90” 3812mm / 150.0
inches
1829mm / 72.0
inches
1372mm / 54.0
inches
2286mm / 90.0
inches
100” 4238mm / 166.9
inches
2032mm / 80.0
inches
1524mm / 60.0
inches
2540mm / 100.0
inches
SCREEN SIZE
Projection
Range(D)
Screen width(A)
SCREEN
HEIGHT(B)
SCREEN
DIAGONAL
LENGTH(C)