Filter
Top Products
79
Setup and Reset
7
7 Setup and Reset
7.1.6 USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
z Data transmission is not available if USB Super Charging is on.
z To enable standard charging or data transmission, set USB Super Charging to off.
z The input source does not need to be changed.
Configuring USB Super Charging
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product.
4 Press [ ] to move to USB Super Charging and press [ ] on the product. The following
screen will appear.
z Off: Deactivate USB Super Charging
z 1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Only the USB 3.0 port marked [ ] supports high-speed battery charging
z 2 Ports: Enable two USB 3.0 ports for quick battery charging.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
7.1.7 Wireless ID
Wireless ID is a unique ID assigned to a monitor. The "Samsung Central Station Setup" program reads
the ID and identifies each of nearby monitors. The ID is shown in the "Samsung Central Station Setup"
program and in the lower part of the HUB menu.
MENU
ࢇࢷ ֩Ѝ ۴ࢇѰ
:
:
:
:
:
:
:
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
2II
'LVFRQQHFWHG
'LVFRQQHFWHG
'LVFRQQHFWHG
'LVFRQQHFWHG
2II
1SRUW
2SRUWV
AUTO