Camera
45
Configuring settings for Camera
Tap
→
to configure settings for Camera. The available options vary by mode.
•
Photo size
: Select a resolution for photos. Use higher resolution for higher quality. Higher
resolution photos take up more memory.
•
Flash
: Activate or deactivate the flash.
•
Timer
: Use this for delayed-time shots.
•
Detection display
: In Auto mode, display scenes that are automatically detected on the
screen when half-pressing the Shutter button.
•
Share shot
: Send a photo directly to another device via Wi-Fi Direct.
•
Buddy photo share
: Set the device to recognise a person’s face that you have tagged
in a photo and send it to that person. Face recognition may fail depending on the face
angle, face size, skin colour, facial expression, light conditions, or accessories the subject
is wearing.
•
ChatOn photo share
: Send a photo directly to another device via
ChatON
.
•
Remote viewfinder
: Set to control the camera with your mobile device.
•
AF/Shutter sound
: Adjust the shutter and auto focus sounds.
•
Beep
: Activate or deactivate beep sounds.
•
Description
: Display mode descriptions.
•
Guide line
: Display viewfinder guides to help composition when selecting subjects.
•
Display brightness
: Set the brightness of the screen.
•
Auto screen off
: Set the length of time the device waits before turning off the display’s
backlight.
•
Review
: Briefly display photos taken.
•
Date/time imprint
: Use this to imprint the date and/or the time on the photos when
taking them.
•
GPS Tag
: Attach a GPS location tag to the photo.
•
To improve GPS signals, avoid shooting in locations where the signal may be
obstructed, such as between buildings or in low-lying areas, or in poor weather
conditions.
•
Your location may appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.