Filter
Top Products
Connecting to an Analog Amplifier
Connecting a Digital Audio System
1
If your audio system has a optical dig-
ital audio input, connect to the “DIGI-
TAL AUDIO OUT(OPTICAL)” jack on
the TV.
Be certain to remove the black cover
from the optical output before insert-
ing the cable.
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
TV Rear Panel
1
The “AUDIO OUT” terminals cannot
be used for external speakers. You
must hook them up to an amplifier.
When an audio amplifier is connected
to the “AUDIO OUT” terminals:
Decrease the gain (volume) of the
audio amplifier, and adjust the volume
level with the volume control on the
TV.
TV Rear Panel
• OPTICAL: converts the electric
signal into an optical light sig-
nal, and transmits it through
glass fibers. A transmission
system of digital audio in the
form of a light wave, S/PDIF
format using a glass conductor.
See page 78 to set the digital
output format (Dolby Digital or
PCM) appropriate to you digital
audio component.
8
BP68-00429A-00Eng 11/10/04 3:18 PM Page 8
Downloaded from www.Manualslib.com manuals search engine