Filter
Top Products
5-5
Samsung Electronics
Disassembly and Reassembly
Service Manual
6. Separate Heat Roller Ass'y after remove six
screws and after removing 6 screws as shown
in below, take out the heat roller assembly in
direction of the arrow while pulling the both side
of the unit-brush
Caution : • Be careful not to damage or contaminate the sur-
face of the roller when assembling/disassembling
the heat roller.
• Additional state: Be careful especially not to dam-
age the covering of the fusing assembly.
(If the cover is damaged, it could cause an electric
leakage.)
7. Unplug Thermister Harness from the Fuser
cover.
8. Remove one screw and separate Thermister
from the inter connector Fuser Cover.
Thermister Harness
Thermister
Fuser Cover
Unit-Brush
Heat Roller