Filter
Top Products
8.5 <
Maintenance>
Replacing the toner cartridge
• Toner Empty appears on the display.
•The Status LED lights red.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 7.1.
1 Open the top cover.
2 Pull the toner cartridge out.
3 Remove the new toner cartridge from its bag.
Caution
• Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
4 Locate the sealing tape at the end of the toner cartridge. Carefully
pull the tape completely out of the cartridge and discard it.
5 Thoroughly shake the cartridge 4 or 6 times to distribute the toner
evenly inside the cartridge.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
Note
• The sealing tape should be longer than 60 cm when correctly
removed.
• Holding the toner cartridge, pull the sealing tape straight to
remove it form the cartridge. Be careful not to cut the tape. If
this happens, you cannot use the toner cartridge.
• Refer to the helpful pictures on the cartridge wrapping paper.
Caution
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.