Filter
Top Products
C
OPYING
3.6
Using the Bypass Tray
The Bypass tray is located at the right side of your product. It
can be closed when you are not using it, making the product
more compact.
Use the bypass tray to print transparencies, labels, envelopes or
postcards in addition to making quick runs of paper types or
sizes that are not currently loaded in the tray.
Acceptable print media are plain paper with sizes ranging from
3x5, to Legal 8.5 x 14 inch, the largest size acceptable, and
weighing between 16lb and 43lb.
The following table summarizes the print media allowed as well
as their stacking height limit.
Notes:
• Always load only the print media specified in Specifications to
avoid paper jams and print quality problems.
• Do not hit the bypass tray or rest your hands on it; otherwise the
tray may be damaged or detached from the product.
• Remove any curl on postcards, envelopes, and labels before
loading them into the multi-sheet bypass feeder.
Paper Type Stacking Height Limit
Plain Paper
100 sheets or 9mm (max)
a
a.The height is measured with the stack of sheets laid, without being touched
by hands, on a flat surface.
Envelope
10 envelopes or 9mm (max)
a
Transparency
30 sheets or 9mm (max)
a
Label
10 sheets or 9mm (max)
a
Cardstock
10 sheets or 9mm (max)
a