Filter
Top Products
96
Chapter 4.
Settings and Upgrade
Upgrading Memory
3
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
Fixing Screw
4
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
5
Push the memory module down so that it is completely xed.
If the memory does not t easily, push the memory module
down while pulling the memory module latches outward.
Memory module
latches
6
Close the memory compartment cover and fasten the screw.