Filter
Top Products
ENG
SADT-100EC_5
7. Prepare the camera adapter of the CAMERA to install.
Connect the power cable, video out cable and alarm I/O cable to the camera adaptor.
When connect the video output cable, use the L type BNC adapter(suported).
For more information, see the installation guide for the SmartDome camera.
8. Arrange the cables, and then fix the camera adapter into the screw fixing hole of bracket
adapter attached to ceiling mount adapter by using 4 screws (M3×L6, included in camera
product).
Fasten the camera adaptor so that the lever of the camera faces the opposite side of the
internal projections of the adaptor.
POWER CABLE
VIDEO OUT
ALARM IN/OUT
CAMERA ADAPTOR
BNC ADAPTOR
L TYPE
CEILING MOUNT ADAPTOR
BRACKET ADAPTOR
CAMERA ADAPTOR
BRACKET ADAPTOR
Extrusion RIB
LEVER
BNC ADAPTOR-
L TYPE
CAMERA ADAPTOR
LEVER
BRACKET ADAPTOR
The hole for
joining a SCREW
Extrusion RIB
SADT-100EC_ENG.indd 5 2008-01-23 오후 4:14:42