Filter
Top Products
P
RINT MEDIA
4.9
Loading Paper
4
Place paper with the print side face
up, and against the left edge of the
tray.
5
Slide the paper width guide to the left
flush against the stack of print material
without bending.
Stack height limit mark
6
After printing, push the extender back
to its place and close the Multi-Purpose
Tray.
Note: Make sure that you have not
loaded too much print media. The
stack should be under the stack height
limit mark. The print media buckles if
you load a stack that is too deep, or
push it in too far.