Filter
Top Products
22
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds
■
The monitor is using its power
management system.
■
Move the computer’s mouse or
press a key on the keyboard
PowerSaver,
page 20.
Image is not stable and
may appear to vibrate
■
Check that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings
Display Mode,
page 18.
Display Modes,
page 28.
■
If the setting is not correct, use your
computer utility program to change
the display settings.
Installing the Video
Driver, page 8.
NOTE: Your monitor supports multiscan display functions
within the following frequency domain:
■
Horizontal frequency:
■
Vertical frequency:
■
Maximum refresh rate:
30 kHz-61 kHz
50 Hz-75 Hz
1024 x 768 @ 75 Hz
(Analog)
1024 x 768 @ 60Hz
(Digital)
Image is not centered
on the screen.
■
Adjust the horizontal and vertical
position.
H-Position, page 15.
V-Position, page 15.
You need the monitor
driver software
■
Download the driver from the internet
at:
http://www.samsungelectronics.com
Table 5. Troubleshooting problems – Image (
Continued
)
What you see... Suggested Action Reference
Appendix