Filter
Top Products
provides a sharp image.
3) Movie
Select this mode when the surroundings are dark.
This will save power and reduce eye fatigue.
4) Custom
Select this mode when you want to adjust the image
according to your preferences.
>>Click here to see an animation clip
Brightness button [ ]
( Available in Analog Mode Only )
When OSD is not on the screen, push the button to adjust
brightness.
>>Click here to see an animation clip
Enter button [ ] /
SOURCE button
Activates a highlighted menu item. /
Push the '
SOURCE
', then selects the video signal while the OSD
is off. (When the SOURCE button is pressed to change the input
mode, a message appears in the upper left of the screen
displaying the current mode -- Analog, Digital, Video and S-
Video input signal.)
Note : Changing the source is allowed only in external devices
that are connected to the monitor at the time.
AUTO button
(Available in Analog mode only)
When the '
AUTO
' button is pressed, the Auto Adjustment screen
appears as shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming
video signal. The values of fine, coarse and position are adjusted
automatically.
>>Click here to see an animation clip
PIP button ( Available in Analog/Digital(PC) Mode Only )
In Analog or Digital Mode, turns on Video screens in PIP Mode.
Power button [ ]
Use this button for turn the monitor on and off.
Power Indicator
This will enable you to see the overall power status of the
system. For more information, see the PowerSaver section.
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)