Filter
Top Products
User’s Guide 30
On-Screen Display
You can see the frequency (user control mode) used by the user, the
polarity of the operational signals, the default frequency (default
mode) set when you buy the monitor and the resolution level.
Note: These screens do not allow any changes to the settings, they
are for information only.
1 Push the Menu( ) button.
2 Push the button or button until the Menu screen is displayed.
3 Push the Menu( ) button to open the Display Timing adjustment
screen.
4 Use the button to see the user control mode and the default mode.
You can change the position where the OSD menu appears on your
monitor.
1 Push the Menu( ) button.
2 Push the button or button until the Menu screen is displayed.
Push the button or button to select Menu Position.
3 Push the Menu( ) button to open the Menu Position adjustment
screen.
4 Use the button or button to place the menu in the position
you prefer.
Display timing
Menu Position
Menu How to adjust