Filter
Top Products
3.12
Basic Operation
Sending a recall
Some special phone services require a switch-hook signal for proper
operation. For example, if you have call-waiting, you can put a call on
hold and take a second call on the same line by pressing the
Recall/Status button.
1. When you are on the telephone and hear the call waiting signal,
press
Recall/Status once. The first caller is on hold and you are
speaking to the second caller.
2. Press Recall/Status again to talk to the first caller again.
Note: If you do not have a special service that uses the switch-hook signal, do not
press
Recall/Status during a call. If you do, you could disconnect the
line.
Monitoring a dual job status
Your machine can perform more than one of many functions simultane-
ously. For example, you can :
• Receive a fax into the memory while making a copy.
• Store a fax document for later transmission while printing an incoming
fax.
When the machine performs dual tasks, press Recall/Status to see the
current status on the display of the other operation.
Each time you press
Recall/Status, the current status of the two operations displays alterna-
tively.