Filter
Top Products
2.44
Other functions
Original Received data
Original Received data
- H. REDUCTION (Horizontal)—If you turn the RX reduction feature on,
you are allowed to set the horizontal reduction feature on or off. With
horizontal reduction enabled, the machine will reduce an incoming page
containing overflow data along the vertical axis only. The net effect of
horizontal reduction will be a vertical compression of the image as
shown below:
If you want to reduce incoming pages equally along both axes in oder to
maintain e proportionality of the original image, turn the horizontal
reduction feature off. If you turn this feature off, the machine reduces the
data as shown below.
Press 1 to turn this feature on.
Press 2 to turn this feature off.
• ECM MODE (Error Correction Mode)—This mode compensates for poor
line quality and ensures accurate, error-free transmission with any other
ECM-equipped facsimile machine. If the line quality is poor, transmission
time may be increased when ECM is enabled.
Press 1 to turn the error correction mode on.
Press 2 to turn the error correction mode off.
• RX REDUCTION—When receiving a document as long as or longer than
the paper installed in your machine, the machine can reduce the data in
the document to fit onto your recording paper size.
Turn on this feature if you want to reduce an incoming page that may
otherwise need to be divided into two pages with only a few centimeters
on the second page. If the fax machine cannot reduce the data to fit into
one page with the feature enabled, the data is divided and printed in
actual size on two or more sheets if needed.
Press 1 to turn this feature on. Note that this feature does not apply to the
copy mode.
Press 2 to turn this feature off. The overflow data will be printed out on a
second page.