Filter
Top Products
Preparation
Installation and Basic Adjustments
15
1. Plug the power cord into the power terminal on the rear side of the projector.
2. Press and push the power switch on the rear side of the projector toward "
-
".
3. Press the POWER button of the projector or the ON button of the remote control.
4. Screen display comes up in 30 seconds.
231
Turning On Projector
NOTE
■
When you turn off the projector, the cooling fan stops within 1 minute and 30 seconds.
■
When the cooling fan stops, push the power switch toward "O" and unplug the power cord.