Samsung SP-M225 Projector User Manual


 
3-6 Using
3-6 Network Management
3-6-1. Management using the Web Browser
The Web Browser lets you monitor and control one projector from a PC without installing any software. Before you
can use the Web Browser, you must connect your projector to your local area network. For directions explaining how
to connect to a network,
see section 2-17, Connecting to a Network.
To control multiple projectors from a single PC, install and run Samsung Projector Manager.
For information about Samsung Projector Manager, go to 3-6-2
.
Check the network connection between the PC and projector before connecting the Web Browser. If the network
connection has failed, the Web browser window may not be available for use.
To use the Web Browser, your PC must meet the following minimum system requirement :
RAM: More than 10MB
Hard Disk capacity: More than 10MB
Display resolution: More than 640 x 480
Supported OS : Microsoft Windows XP, Windows Vista
Web browser : Microsoft Internet Explorer 6 or later version, Netscape Navigator 9 or later version, Mozilla FireFox 3.0.x
or later version, Google Chrome.
1. Connecting
Enter the projector's IP address into the web browser address bar.
Find the projector's IP address by pressing the [MENU] button and selecting <Setup> -> <Network> -> <IP Setting>.
The Network Projector window appears. For information about control items in the Network Projector window, refer to the
items under Section 3-5, Using the Screen Adjustment Menu.
Some functions listed in 'Using the Screen Adjustment Menu' cannot be used in the web browser because of limitations in
remote control by the network.