Filter
Top Products
Using 3-5
3-5-4. Option
MENU DESCRIPTION
Language Using this function, you can select the language used for the menu screen.
Menu Option • <Position> : You can move Menu Position up/down/left/right.
• <Transparency> : You can set the translucency of the menu.
• <High>-<Medium>-<Low>-<Opaque>
• <Display Time> : You can set the display time of the menu.
• <5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
Sound
The projector comes with an internal 7W (mono) speaker. Use the equalizer settings below to adjust
the sound.
• <100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Filter Check Time Sets the check period for the filter. (Unit: hours)
• <Off>-<100>-<200>-<400>-<800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for 1 minute whenever the projector is turned on.
Filter check message: "<Check the filter, and if necessary, clean or replace it.>".
Auto Power On With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
ing the Power button.
• <Off>-<On>
Sleep Timer With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
cally.
(There must be no button input from the remote control or the top of the projector for the specified
time)
• <Off>-<10 min>-<20 min>-<30 min>
Security To deter theft, you can set a password that users must enter when the projector powers on. When
you set a password, the projector will not work without it.
• <Power On Protection>
• <Off> : Enter your current password and set the protection function to off.
• <On> : Enter a new password and set the protection function to on.
• <Change Password> : Change your current password.
Use the displayed number keys to enter or change the password.
Panel Lock
You can disable the buttons on the projector body so that the projector can only be operated by the
remote control.
• <Off> - <On>
Information You can check external source signals, picture setup, and PC picture adjustment.