Samsung SP-M250S Projector User Manual


 
Major Safety Precautions 1-3
Caution
Usage Related
Do not install the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and do not
install it in a vehicle.
This may result in electric shock or fire.
Do not install the product in areas with
heavy dust.
Take care not to block the vent with a table
cloth or curtain.
Otherwise, it may result in fire due to
internal overheating.
Do not let the product drop while moving it.
This may result in a problem with the
product or injury.
When putting the product down, place it
gently.
Failing to do so may result in a problem
with the product or injury.
Do not install the product at a height where
children may reach it.
If a child touches the product, the
product may fall and this may result in
injury.
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflamma-
ble objects into the product (the vents,
ports, etc).
If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
Otherwise, it may result in a problem
with the product, electric shock or fire.
Do not let children place objects such as
toys or cookies on the product.
If a child tries to reach for any of these
objects, the product may fall and cause
harm.
Do not disassemble, or attempt to fix or
modify the product.
When the product requires repairs,
contact a Service Center.
Do not look directly at the light of the lamp
nor project the picture into someone's
eyes.
This is dangerous, especially for
children.
Avoid using or placing inflammable spray
or objects near the product.
This may result in an explosion or fire.
When you remove batteries from the
remote, be careful that they are not swal-
lowed by children. Keep batteries out of
the reach of children.
If swallowed, see a doctor immediately.
Avoid placing a liquid container such as a
vase, flowerpot, beverage, cosmetics or
drugs, or a metal object over the product.
If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
Otherwise, it may result in a problem
with the product, electric shock or fire.