Filter
Top Products
3-6 Using
Temperature Level Status Icons
• Managing the Projectors
: Using the icons in the <Projector List> (only applicable to 'V'-marked projectors in the monitoring window)
(Refresh): Updates the status of the projector.
(Power On): Turns on the power of the projector.
(Power Off): Turns off the power of the projector.
Warning The air filter has reached the end of its life. The air filter needs to be replaced.
Warning The air filter has been blocked by dust. The air filter needs to be cleaned.
Error The air filter has been blocked by dust. The air filter needs to be cleaned.
ICONS STATUS STATE ACTION
Temperature status
The projector's internal temperature is
normal.(standby mode)
None. It's normal.
Temperature status
The projector's internal temperature is
normal.(low)
None. It's normal.
Temperature status
The projector's internal temperature is
normal.(medium)
None. It's normal.
Temperature status
The projector's internal temperature is
normal.(little bit high)
None. It's normal.
Temperature status
The projector's internal temperature is
higher than the limit.
Refer to Action 3 in Clearing Indi-
cator Problems.
Temperature status
The projector's internal temperature is too
high. The projector is turned off automati-
cally.
Refer to Action 4 in Clearing Indi-
cator Problems.
ICONS STATUS STATE ACTION