Filter
Top Products
Rev. 1.07
- 20 -
SRP-350
4. Specification
Printing method Thermal line printing
Dot density 180 dpi (7dots/mm)
Printing width 72 mm
Paper width 80 mm
Characters per line (default)
42 (Font A)
56 (Font B)
Printing speed
46.2 lines/sec, 150 mm/sec
Receive Buffer Size 4K Bytes
※ NOTE : Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
SMPS Input voltage 100~240 VAC
Frequency
50/60 Hz
Supply voltage
SMPS Output voltage
24 VDC
Temperature
0 ~ 45 (Operating)℃
-20 ~ 60 (Storage)℃
Environmental
Conditions
Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Mechanism Head 150 Km
LIFE *
Auto Cutter 1,500,000 Cut
MCBF * Mechanism 37,000,000 lines
* These values are calculated under printing level 2 with recommended paper at normal
temperature.
* These values may vary with environment temperature, printing level, etc.
* This equipment is indooruse and all the communication hiring are limited to inside of
the building
* The switch is the disconnecting device. Turn off switch from any hazard.