Filter
Top Products
35
5.1.3 Commands list for SRP-500 Series. (CITIZEN iDP-3541 Mode)
n Command Description Hexadecimal
1 BEL First drawer drive command1 07
2 LF Paper feed command 0A
3 FF n “n”-lines paper feed command 0C n
4 SO Enlarged character command 0E
5 SI Normal character command 0F
6 DC1 Initial set command 11
7 DC2 Inverted character command 12
8 DC3 Red color print command 13
9 CAN Clear command 18
10 SUB Second drawer drive command 1A
11 ESC BEL Drive pulse setting command for the first drawer 1B 07
12 ESC - Underline command 1B 2D
13 ESC 1 1/9 inch paper feed preset command 1B 31
14 ESC 2 2/9 inch paper feed preset command 1B 32
15 ESC C Paper length set command 1B 43
16 ESC P <0> Paper partial cut command 1B 50 00
17 ESC P <1> Paper partial cut command 1B 50 01
18 FS First drawer quick drive command 1C
19 CR Printing ØD
20 ESC * n1 n2 Specifying the bit image mode 1B 2A n1 n2
21 ESC f <1> Form feed 1B 66 Ø1
5-2. Character Code Tables
n Page
0 PC437
2 PC850
3 PC860
4 PC863
5 PC865
16 PC1252
17 PC866
18 PC852
19 PC858
21 PC862
22 PC864
23 PC874
36
5-3. Command descriptions
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09
Decimal 10
[Description] Moves the print position to the next horizontal tab position.
[Notes]
•
This command is ignored unless the next horizontal tab position has been
set.
•
Horizontal tab positions are set with ESC D.
• The default tab positions are at intervals of 8 characters (columns 9, 17,
25..) for the font B (12 x 12).
[Reference] ESC D
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line
based on the current line spacing.
[Note] This command sets the print position to the beginning of
the line.
[Reference] ESC 2, ESC 3
CR
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] This command prints the data in the print buffer and does
not feed the paper.
[Note] Sets the print starting position to the beginning of the line
[Reference] LF