Filter
Top Products
27
3.4 Installation Procedure of Windows NT4.0
Please follow the following steps one by one to install the MiniPCI/PCI Card successfully.
1. Insert SAMSUNG 11Mbps WLAN MiniPCI/PCI Card into the slot and power on your
computer.
2. Windows NT will start in your computer and follow the below procedures.
Notice that there’s some difference between
When Windows NT networking is not
installed
and
When Windows NT networking is already installed .
<CASE1> When Windows NT networking is not installed:
1. Since there is no Windows NT networking installed yet, you should install your
driver manually. To do so, click on
Start
in task bar, go to
Settings
and then to
Control Panel
.
2. Under
Control Panel
, double click on
Network
icon.
3. Since there is no
Windows NT
networking installed yet, you maybe asked if you
want to install NT networking first. Click on
Yes
and then
Network Setup Wizard
will be start. Select ‘
Wired to the network’
and click on ‘Next’. In ‘network setup
wizard’ box, click on ‘
Select from list button’
.