Filter
Top Products
15
5. AML Setting Using AP Manager
① AML stands for Automatic Multi-link. Using AP as Wireless Bridge, it is used
to connect several divided networks into one. It connects several [Slave]s with
one main [Master].
② After executing AP Manager, click [Radio] tab on “Tab Bar”. After selecting
AP to set AML on “List Box” using mouse, set Operation Mode with
“Automatic Multi-link” on [Radio] Dialogue Box.
③ When “Automatic Multi-link” on [Radio] Dialogue Box is selected, [Automatic
Multi-link] Box, which sets AP status(Master or Slave) in AML mode, will
appear.
(Hub)
<AML Area><Wire Network using Hub> <Wireless Network using AP>
< Wired and Wireless Network using Hub and AP>
(Hub)
[Master]
[Slave] [Slave]
X-Cable
Internet Network
Internet Network