Filter
Top Products
English 10
Automatic Save
Whenever you open the OSD and allow an adjustment window to remain active for about 3
seconds without pressing other buttons, the monitor automatically saves any adjustment you
have made. These changes are saved into a user area in the monitor.
The monitor can save adjustments for up to 5 user modes. It has 9 for 151MP (11 for 171MP )
factory preset or preload modes, one for each signal frequency as listed in table 7 on page 36.
If you have made no adjustments, the OSD disappears and the monitor does not save anything.
Direct-Access Features
While you are watching full screen TV or in PIP
mode
6
Menu
■
Opens the OSD and selects the highlighted function.
7
Exit
■
Exits from menus and sub-menus.
■
Exits from the OSD system.
8
Auto
■
“Auto” allows the monitor to self-adjust to the
incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Program
Valid only after performing "Channel auto program".
When OSD is not on the screen, push the
" " or " " button to select program channel
number.
1
Push the " "
button to decrease channel
number
.
2
Push the " " button to increase the
channel number.
Volume
When OSD is not on the screen, push the
" " or " " button to adjust volume.
1
Push the "
" button to decrease the
volume.
2
Push the " " button to increase the
volume.
No. Name Description
CH
Volume
Adjusting Your LCD Monitor
4_E151MP171MPbody.fm Page 10 Friday, September 7, 2001 3:04 PM