Filter
Top Products
Menu Description
Brightness Adjust Brightness.
Source
Menu Description
Source Selects the Video signal while the OSD is off.
Picture
Brightness
Menu Description Play/Stop
Brightness
Adjust the Brightness.
Direct Access Feature : When OSD is not on the screen, Push
the button to adjust brightness.
Contrast Adjust the Contrast.
Color
Menu Description Play/Stop
Color Tone
The tone of the color can be changed and one of four modes
can be selected - Cool, normal, Warm and Custom.
Color Control Follow these steps to adjust individual R,G,B color balance.
Gamma Select one of three pre-defined gammas.
Image
Menu Description Play/Stop
Coarse
Removes noise such as vertical stripes. Coarse adjustment may
move the screen image area. You may relocate it to the center
using the Horizontal Control menu.
(Available in analog Mode Only)
Fine
Removes noise such as horizontal stripes. If the noise persists
even after Fine tuning, repeat it after adjusting the frequency
(clock speed).
(Available in analog Mode Only)
Sharpness Follow these instuction to change the clearance of image.
H-Position
Follow these instructions to change the horizontal position of
the monitor's entire display.
(Available in analog Mode Only)
V-Position
Follow these instructions to change the vertical position of the
monitor's entire display.
(Available in analog Mode Only)
1. Picture
Brightness Contrast
2. Color
Color Tone Color Control Gamma
3. Image
Coarse Fine Sharpness H-Position V-Position
4. OSD
Language H-Position V-Position Transparency Display Time
5. Setup
Auto Source Image Reset Color Reset
6. Information