Filter
Top Products
This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard.
When this function is in the " " (Mouse) position, you control the pointer of the computer used the projector's
wireless remote control unit.
When this function is in the " " (Control) position, you control the projector by computer.
NOTE: Before you control the projector by computer, install USB driver (optionally saled parts) and set up the computer
following instruction in the USB driver package. Contact your authorized dealer.
50
This projector has other functions setting: Blue back, Display, Reverse T/B, Reverse R/L, Split wipe, Power management,
USB, Remote control and Lamp age.
TB
TB
LR
LR
OTHER FUNCTION SETTING
BLUE BACK (On or Off)
SPLIT WIPE (On or Off)
REVERSE L/R (On or Off)
REVERSE T/B (On or Off)
DISPLAY (On or Off)
USB (Mouse or Control)
POWER MANAGEMENT (On or Off)
When this function is in the "On" position, the projector will project a blue image without video noise on the screen when the
video source is unplugged or turned off.
When this function is in the "On" position, on-screen displays always appear when adjustments are made. Although these
on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To avoid this,
you can keep back certain displays by switching this function "Off". The followings are the displays that you can hide.
● Wait Display ● Mode Display ● Volume Display
● Mute Display ● Zoom/Focus/Lens shift Display ● D.Zoom Display
● Normal Display ● No show Display
When this function is in the "On" position, the top/bottom picture reverse.
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image side
ways when the input source is changed.
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the
next one appears from the center to side ways like drawing the black curtains.
Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) over 5
minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is input.
To activate this function, turn the "Power management" in the SETTING menu "On".
When this function is in the "On" position, the left/right picture reverse capability
lets you project onto a rear projection screen.