Filter
Top Products
59
Antitheft Alarm Function
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE AND KEEP IT SECURELY. IF YOU FORGET
YOUR PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM
FUNCTION CAN NO LONGER BE CHANGED.
Change the PIN code
Press the F button and enter the four-digit PIN code
number within about 10 seconds. The ALARM indicator
blinks red for a few seconds and a high-pitched
confirmation sound is produced.
Other settings
Reset the settings
Select “Factory default” in the Setting menu to reset the
settings for the Antitheft alarm function.
1
2
While the indicator is blinking, enter a new PIN code,
then you will hear a high-pitched confirmation sound
and the ALARM indicator is turned off.
When you enter an incorrect PIN code, you will hear a
low-pitched sound. If you enter incorrect PIN code
three times in a row, the alarm will start ringing.
The PIN code for the Antitheft alarm function is a
combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to
enter the PIN code. The default PIN code is “1111.”
✔Note:
•This is effective only when the Antitheft alarm setting is released.
The Alarm operating configuration can be changed when
the Antitheft alarm function is set to “Off.” See page 58 for
setting or releasing this function.
Press the SELECT button at Alarm icon in the Setting Menu
to display the Alarm setting dialog box. Use the Point ed
buttons to select the desired option; use the Point 7 8
buttons to set the selected option.
Battery charge
See the next page for details.
Alarm volume
Small, Medium, Large
Sensitivity
Low .....................Less sensitive
Medium ..............Normal sensitivity
High ....................Highly sensitive (default)
Ringing time
10 seconds .........Rings about 10 seconds (default).
60 seconds .........Rings about 60 seconds.
Long time............Rings until the end of the battery life.
Alarm
Press the SELECT button at
the Alarm icon to display the
Alarm setting dialog box.
✔Notes:
•The Alarm icon appears dimmed and can be
unavailable when the Antitheft alarm function is set
to “On” or if the battery is not installed, discharged,
or coming to the end of its life.
•While the Alarm icon is selected, the Antitheft alarm
setting buttons can be unavailable.
•When selecting “Long time” option in the Ringing
time, the duration of alarm sounding differs
depending on the battery life.
Use the Point 7 8
buttons to set the
selected option.
Alarm operating configuration
F button
Button 1, 2, 3
Top Control
ALARM indicator
Rear Terminal