Sanyo PLV-Z1BL Projector User Manual


 
26
Video input
Video System Selection menu (VIDEO / S-VIDEO)
Press the MENU button, and the main menu appears. Select
the Video System Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
Choose the system that you want to select with the POINT
UP/DOWN button, and then press the SELECT button to
activate the item.
1
2
If the projector cannot reproduce proper video image, select a specific
system among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select a specific
component video system among 480i, 575i, 480p, 575p, 720p, 1035i,
and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video System Selection (Video / S-Video)
Video System Selection (Y-Pb/Cb-Pr/Cr)
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
However, when video system is PAL-M or PAL-N, select either PAL-M
or PAL-N manually.
Auto
Video System Selection menu
Close the Video System Selection menu.
Press the MENU button, and the main menu appears. Select
the Video System Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
1
Video System Selection menu (Y-Pb/Cb-Pr/Cr)
Choose the system that you want to select with the POINT
UP/DOWN button, and then press the SELECT button to
activate the item.
2
displays the
selected
system.