Filter
Top Products
4
2. Configuring the Network Settings
Configure the settings required for connecting the camera to the network (LAN) in the menu screen.
• For accessing the Main menu, see pages 5 - 7 on the INSTRUCTION MANUAL supplied with the camera.
• After you turn on the power, it takes approximately one minute for the “NETWORK” setting menu to appear on the “OPTION” screen.
1
Select “IP ADDRESS”, specify the option for
retrieving the IP address, and press the SET
button.
FIX : Manual configuration (Default IP address: 192.168.0.2)
AUTO : Automatic configuration (DHCP)
RThe “IP ADDRESS SETTING” screen appears.
2
Select the item to configure, and press the Select
(c) button.
ROnly the item selected appears and “x” is displayed below the
address.
• To display all the items again, press the Select (d or c) button
repeatedly until “x” disappears.
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
·OPTION
OPTION
TITLE
PRIVACY MASK
PASSWORD
ALARM
LANGUAGE
·NETWORK
PRESET
MENU
OFF
SET y
SET y
SET y
SET y
SET y
OFF
BACK
(SET)
SET SET
·NETWORK
(SET)
RR R
MEMO:
The “MAC ADDRESS” cannot be changed.
Confirm the setting.
·IP ADDRESS
NETWORK SETTING
·IP ADDRESS
PORT
MAC ADDRESS
08-00-7B-81-12-20
FIX y
00080
SET
R
MEMO:
When you select “AUTO” for the “IP ADDRESS” setting in the
“NETWORK SETTING” screen, the IP address cannot be
changed. Confirm the setting, and advance to step
4.
IP ADDRESS SETTING
·IP ADDRESS
192.168.000.002
x
L9EAU_WA(VA-50LAN_INSTALLATION).book 4 ページ ２００６年２月９日 木曜日 午後７時２９分