Filter
Top Products
31
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
P-Timer display
✔Note:
•Seethepreviouspageforthe
descriptionofotherbuttons.
Remote Control
SHUTTER
button
P-TIMER
button
Reduce the upper width
with the Point
e button.
Reduce the lower width
with the Point
d button.
KEYSTONE button
KEYSTONE
button
Basic Operation
SHUTTER button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point ed7 8 buttons to correct keystone
distortion. The keystone adjustment can be stored
(p.45).
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
• The adjustable range can be limited depending on the
input signal.
• “Keystone” disappears after 10 seconds.
See pages 28 and 58 for details.
Reduce the left part with
Point 7 button.
Reduce the right part with
Point 8 button.
PIP button
Press the PIP button on the remote control to select Picture
in Picture or Picture by Picture mode. See page 52 for
details.
PIP VOL. button
Press the PIP VOL. button on the remote control at the PIP
mode. The volume dialog box appears. Use the Point 7 8
buttons to adjust the volume.
PIP button
PIP VOL.
button