Filter
Top Products
SATO RFID User Guide PN 9001147B Page 1
SCOPE
This document is to serve as a guide on how to create RFID data using Label Gallery Plus/
TruePro software. It will include menu selection and all relative command code sequences.
OVERVIEW
The Alien Technologies RFID Reader and antenna are integrated into printer among the
standard components. A data cable connects the main circuit board to the RFID Reader. The
Reader is, in turn, connected to the antenna by its own antenna cable. Through software
configuration and hardware installation, the printer is then capable of writing and verifying EPC
Class-1 RFID tags. Tag location and orientation within the label is critical to the performance of
the unit.
All “e” series, plug-in interfaces may be used with the RFID print engine, including Ethernet and
802.11b wireless interfaces.
The following process details the steps involved in writing to the EPC tag: