Filter
Top Products
SATO RFID User Guide PN 9001147B Page 2
RFID HARDWARE CONFIGURATION
The RFID hardware kit is comprised of the: RFID Module, RFID Antenna w/coaxial cable, RFID
Cable Set. The figure below displays configuration:
RFID ANTENNA SPECIFICATIONS
Module 85.47 x 53.98 x 7.62 mm (sealed in a shield case)
Antenna 16 x 118 x 1.6 mm
RFID READER SPECIFICATIONS
Name ALR-9930 (module by Alien Technology)
Frequency 902-928 MHz
Communication System Frequency hopping spectrum dispersion
Transmission Output Maximum 1W (30 dBm), Uses less than 250mW
Transmission Output Control 14dB and 0.1 dB steps
Communications Protocol EPC global UHF, Class 1
Source Voltage 5-6 V +/- 3%
Demand Current Maximum 650 mA
Electrostatic Voltage Resistance ESD Class 2