Filter
Top Products
Programming Manual 4. Bar Code Specifications
SATO RISC Printers 167
Note:
1. The data command should be used according to the input mode
or data type. Please refer to the attached programm sample and
print sample.
2. With automatic mode, the data for 80 - 9F hex or E0 - FF hex will
be handled for Kanji data, not Binary data.
3. With manual mode, the multiple data fields for Numeric, Alphanu-
meric, Kanji and Binary can be specified in one job. Also, the
maximum data size should be less than 7000 bytes.