SATO CL408/412 Printer User Manual


 
Programming Manual 2. Command Codes
SATO RISC Printers 77
Note:
1. The print position of a field is affected by both the Rotate
(<ESC>R and <ESC>A3) commands.
2. For print lengths greater than 14 inches an optional Memory Card
must be used.
3. If any part of an image is placed past the maximum number of
dots for standard length and or the capacity of the memory card,
that part of the image will be lost.
4. If any part of an image is placed past maximum allowable dots
across the label, that part of the image will be lost.
5. If you attempt to print where there is no paper, you may damage
the print head.
6. For these commands, the leading zeroes do not have to be
entered. The command V1 is equivalent to V0001.