Filter
Top Products
SATO Asia Pacific Pte. Ltd.
438A Alexandra Road
#05-01/02 Alexandra Technopark
Singapore 119967
Tel : (65) 6271 5300; Fax : (65) 6273 6011
Sales Hotline : (65) 6276 2722; Service Hotline : (65) 6273 6455
Email : sales@satoasiapacific.com
Website : www.satoworldwide.com
© Copyright 2003
SATO Asia Pacific Pte. Ltd.
Warning : This equipment complies with the requirements in Part 15 of FCC rules for
a Class A computing device. Operation of this equipment in a residential area may
cause unacceptable interference to radio and TV reception requiring the operator to
take whatever steps necessary to correct the interference.
All rights reserved. No part of this document may be reproduced or issued to third
parties in any form whatsoever without the express permission of SATO Asia Pacific
Pte. Ltd. The materials in this document are provided for general information and are
subject to change without notice. SATO Asia Pacific Pte. Ltd. assumes no
responsibilities for any errors that may appear.
CT4xx Series Quick Guide Pg 13
Options
Label Cutter
This is an internal option allowing labels to be cut at specified intervals. Controlled
through programming. Factory installed only.
Label Dispenser
Another internal option allowing labels to be peeled from backing for immediate (on
demand) application. Factory installed only.
Label Rewinder
An external accessory that rewinds labels onto a roll after they are printed.
Serial Interface
High Speed RS232 interface option, 9600 to 57.6 Kbytes. Factory installed only.
Ethernet Interface
TCP/IP Protocol Interface option. Factory installed only.
USB Interface
Universal Serial Bus Interface option. Factory installed only.
Coax/Twinax Interface
External Coax/Twinax I/F interface accessory.
Coax I/F emulates an IBM3287-2 printer with a standard Type A BNC connector.
Twinax I/F emulates IBM 5224, 5225 or 4214 printers with auto-terminate / cable-
thru capabilities.