Filter
Top Products
Unit 2: Technical Data
SATO GTxxe Series Operator Manual PN 9001138C Page 2-3
PRINT
Method Direct Thermal / Thermal Transfer
Speed (user selectable)
Thermal Transfer: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 Inches Per Second
Direct Thermal: 2, 3, 4, 5, 6 Inches Per Second
Print Module (dot size) .0049 Inches (.125 mm)
Resolution
203 Dots Per Inch (8 dpmm)
305 Dots Per Inch (12 dpmm)
609 Dots Per Inch (24 dpmm)
Maximum Print Width 4.10 Inches (104 mm)
Maximum Print Length
GT408 Printer: 98.43 Inches (2500 mm)
GT412 Printer: 59.06 Inches (1500 mm)
GT424 Printer: 15.75 Inches (400 mm)
MEDIA
Roll Media
Roll Paper: 10.43 Inch (265 mm) maximum diameter.
Core Size: 1.5, 3, 4 Inch (38.1, 76.2, 101.6 mm) internal diameter.
Wound: Face In / Face Out. Face Out is for linerless only.
Fan-Fold Media Maximum folded height: 7.87 Inches (200 mm)
Standard Mode
Media Width: 0.87 to 5.04 Inches (22-128 mm)
Media Length: 0.24 to 5.04 Inches (6-397 mm)
Backing Paper Width: 0.98 to 5.16 Inches (25-131 mm)
Backing Paper Length: 0.35 to 15.75 Inches (9-400 mm)
Tear-Off
Media Width: 0.87 to 5.04 Inches (22-128 mm)
Media Pitch: 0.67 to 5.04 Inches (17-397 mm)
Backing Paper Width: 0.98 to 5.16 Inches (25-131 mm)
Backing Paper Length: 0.79 to 15.75 Inches (20-400 mm)
Thickness 0.002 to 0.010 Inches (0.06 - 0.268 mm)
RIBBON
Width
Minimum: 1.56 Inches (39.5 mm)
Maximum: 1.77, 2.32, 2.99, 3.31, 3.62, 4.02, 4.37, 5.04
(45, 59, 76, 84, 92, 102, 111, 128 mm)
Length 492 yards (450 m) roll.
Wound Face In / Face Out.
Roll Diameter 3.34 Inches (85 mm)
SENSING
Gap Adjustable
Reflective Eye-Mark Adjustable
Label Adjustable
Continuous Form Sensor not used.