Filter
Top Products
56
Dispense mode printing
Dispense mode printing setting
Changing the dispense mode printing setting
The dispenser operation mode setting is changed by the DIP switch
(DSW) settings when the power is turned on, and by button settings. The
settings are enabled upon turning the power off.
Notes: When the buzzer sound mode is enabled, the buzzer sounds upon
startup.
Release the PRINT/FEED button to stop the buzzer.
To end the dispenser operation mode setting, confirm that the STATUS
LED is on in green, then turn the power off. After changing the dispenser
operation mode setting, be sure to restore the DSW to their original set-
tings.
Type Operation Default
Automatic
printing setting
Prints one label after receiving data, then waits for
label to be peeled. After the label is peeled, the next
label is printed automatically.
Manual printing
setting
Manual printing
setting
Prints one label after receiving data, then enters
offline status. When the PRINT button is pressed, the
next label is printed. After the specified number of
labels are printed, printing is ended, and no labels are
printed when the PRINT button is pressed.
(1) Automatic dispenser printing setting
DSW-1,2,3,4=(OFF,OFF,OFF,ON) + cover open+ PRINT button + POWER
(2) Manual dispenser printing setting
DSW-1,2,3,4=(OFF,OFF,OFF,ON) + cover open + FEED button + POWER
Processing dispenser operation mode setting
(STATUS LED flashes green)
Setting completes
(STATUS LED lights green)