Filter
Top Products
58
Online command setting mode
Online command setting details
Change online command setting
The online command setting is changed by the DIP switch (DSW) settings
when the power is turned on, and by button settings. The settings are
enabled upon turning the power off.
Note:
When the buzzer sound mode is enabled, the buzzer sounds upon
startup.
Release the PRINT/FEED button to stop the buzzer. To check the settings
for head check setting mode, see the test print output (See Section 6, Test
Printing).
To end head check setting, confirm that the STATUS LED is on in green,
then turn power off. After changing the head check setting mode, be sure
to restore the DSW to their original settings.
Type Operation Default
MB400 compatibility
command setting
Sets the online command as standard
legacy command (of theMB200/400
series).
SBPL com-
mand setting
SBPL command set-
ting
Sets the online command as an SBPL
command.
Processing setting
(STATUS LED flashes green)
Settings complete
(STATUS LED lights green)
(1) MB400 compatibility command setting
DSW-1,2,3,4=(ON,ON,ON,ON) + cover open + PRINT button + POWER
(2) SBPL command setting
DSW-1,2,3,4=(ON,ON,ON,ON) + cover open + FEED button + POWER