Filter
Top Products
Other Functions
35
2
Other Functions
User Codes
When user codes are turned on, oper-
ators must input their user codes be-
fore the machine can be operated. The
machine keeps count of the number
of copies made under each user code.
Note
❒ When user codes are turned on,
the machine will prompt you for
your user code after the power
switch is turned on or System Re-
set comes into effect.
❒ To prevent others from making
copies using your user code, press
the {Clear Modes} and {Clear/Stop}
keys simultaneously after copying.
Reference
For details about user codes, see
P.62 “Settings You Can Change with
the User Tools”.
Setting the User Code
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
Press the 0
00
0 or 1
11
1 key to display
“3.Copier Features”, then press
the {
{{
{OK}
}}
} key.
C
Press the 0
00
0 or 1
11
1 key until
“12Key Op. Tools” is displayed,
then press the {
{{
{OK}
}}
} key.
D
Press the 0
00
0 or 1
11
1 key until “7.Pro-
gram User Code” is displayed,
then press the {
{{
{OK}
}}
} key.
E
Enter the desired user code with
the number keys, then press the
{
{{
{OK}
}}
} key.
Auto Start
If you press the {Start} key during the
warm-up period, the {Start} key will
blink and your copies will be made as
soon as warm-up finishes.
A
Make any adjustments to copy
settings during the warm-up peri-
od.
B
Set your originals.
C
Press the {
{{
{Start}
}}
} key.
The {Start} key indicator alternate-
ly flashes red and green.
Note
❒ To cancel Auto Start, press the
{Clear/Stop} key.