Savin 2235 All in One Printer User Manual


 
Basics
16
1
Turning On the Power
A
Press the operation switch to
make the On indicator goes on.
The display panel will come on.
Note
If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
During the warm-up period
(less than 10 seconds for Type 1,
less than 15 seconds for Type 2),
you can use the Auto Start func-
tion.
Turning Off the Power
A
Make sure that the platen cover or
the document feeder is in the
right position.
B
Press the operation switch to
make the On indicator goes off.
Note
Even if you press the operation
switch, the indicator do not
goes off and blink in the follow-
ing cases:
When the platen cover or the
document feeder is open.
When communication is in
progress with external
equipment.
When the hard disk is oper-
ating.
AdonisC2_ENcopy122F_FM.book Page 16 Thursday, February 15, 2001 3:23 PM