Filter
Top Products
29
2. Copying
Basic Procedure
A
Make sure that the machine is in
Copy mode.
If the machine is not in Copy
mode, press the {Copy} key.
B
When the machine is set for the
user code, enter the user code
with the number keys and then
press the {
{{
{#}
}}
} key.
Reference
⇒
P.68 “Other Functions”.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{Clear Modes} key.
D
Set your originals.
Reference
⇒ P.31 “Setting Originals”.
E
Set your desired settings.
F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 999
(default: 999).
❒ To change the number entered,
press the {Clear/Stop} key and
enter the new number.
G
Press the {
{{
{Start}
}}
} key.
The machine starts copying.
Note
❒ When you set originals on the
exposure glass, press the {#}
key after all originals are
scanned.
❒ Copies are delivered face down.
❒ To stop the machine during the
multi-copy run, press the {Clear/
Stop} key.
❒ To return the machine to the ini-
tial condition after copying,
press the {Clear Modes} key.
AdonisC2_ENcopy122F_FM.book Page 29 Thursday, February 15, 2001 3:23 PM