Filter
Top Products
Copying
30
2
Note
❒
The maximum copy quantity can be set between 1 and 999 (default:
999
).
See “Maximum Copy Quantity” in
⇒
P.313
“General Features
2
/
3
”
.
❒
To change the number entered, press the
{
Clear/Stop
}
key and enter the
new number.
G Press the
{
Start
}
key.
The machine starts copying.
Note
❒
When you set originals on the exposure glass, press the
{
#
}
key after all
originals are scanned.
❒
Usually, when you set a single original on the exposure glass or in the doc-
ument feeder, the copied paper is delivered face up. However, with some
functions, copies will be delivered face down.
❒
You can choose to have copies delivered either face up or face down (ex-
cept for copying through the bypass tray). See “Face-Up/Down Selection
in Platen Mode” in
⇒
P.329
“Input/Output”
.
❒
To stop the machine during the multi-copy run, press the
{
Clear/Stop
}
key.
❒
To return the machine to the initial condition after copying, press the
{
Clear
Modes/Energy Saver
}
key.
-
Auto Reset
The machine returns to its initial condition automatically when your job is fin-
ished, after a certain period of time. This function is called “Auto Reset”.
Note
❒
You can change the Auto Reset time. See “Auto Reset Timer” in
⇒
P.310
“General Features
1
/
3
”
.
-
Auto Off
The machine turns itself off automatically after your job is finished, after a cer-
tain period of time. This function is called “Auto Off”.
Note
❒
You can change the Auto Off time. See “Auto Off Timer” in the System Set-
tings manual.