Savin 4502/4502p All in One Printer User Manual


 
Size Magnification
75
2
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based upon
the lengths of the original and copy.
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing A with a.
Limitation
If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
However, with some ratios, parts
of the image might not be copied
or blank margins will appear on
copies.
Note
A ratio is selected in the range of 25
to 400%.
A
Press the [Reduce/Enlarge] key.
B
Press the [Specifid Ratio] key.
C
Make sure that the [Specifid Ratio]
key is highlighted.
D
Enter the length of the original
with the number keys and press
the [#] key.
Note
You can enter sizes within the
following ranges:
To change the length entered,
press the [Clear] or {Clear/Stop}
key and enter the new length.
Amm amm
Metric
version
1 999mm (in 1mm steps)
Inch
version
0.1" 99.9" (in 0.1" steps)
AdonisC2_ENcopy122F_FM.book Page 75 Thursday, February 15, 2001 3:23 PM