Filter
Top Products
Basics
22
1
Setting Custom Sized Originals
When copying from custom sized originals, specify the size of the originals so
that copies are well aligned.
Limitation
❒ You must set your custom size originals on the exposure glass.
Reference
For the standard sizes the machine can detect, ⇒ P.14 “Standard Size Origi-
nals”.
Note
❒ The dimensions you can enter must be within the following ranges:
A
Select the copy paper size.
B
Press the [Custom Size Orig.] key.
C
Make sure that the [Orig. Horiz.] key is selected. Enter the horizontal size
with the number keys, then press the [#] key.
Note
❒ To change the value entered, press the [Clear] key and enter a new value.
Vertical size 50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
Horizontal size 50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
copy4na.tif
copy5na.tif