Filter
Top Products
Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 17
©2001 SBC Advanced Solutions, Inc. All rights reserved
5-19 You will be prompted to bind a TCIP/IP address to the Adapter. Select the ITeX ADSL
PCI NIC in the drop down box in the Microsoft TCP/IP Properties window shown
below. Next, click “Specify an IP address.” Fill in the IP address with the dummy IP of
10.0.0.1 and Subnet Mask of 255.0.0.0. These will be replaced by your Internet Service
Provider instructions to be installed later. Click OK.
5-20 You will be prompted to reboot the system. This may take several ( 3-5 ) minutes as
network settings are established. BE SURE TO LEAVE SBC EXPRESS CD IN CD-
ROM DRIVE. Click Yes.