Sceptre Technologies X20g-NagaIII Computer Monitor User Manual


 
2 Rev.2
Note: Using a computer for an extended period of time with a poor workstation
set-up and incorrect working habits can cause health problems. The science of
ergonomics studies the relationship between health and a suitable working
environment. There is a section on ergonomics at the end of this chapter. For
more information on ergonomics, contact your nearest computer bookstore, or
local library. The Internet also has information on this and other subjects.
If you previously were using a CRT monitor instead of a LCD monitor, please do not
connect the LCD monitor to your computer yet. Please use the CRT monitor and turn on
your computer. Make sure your video card’s refresh rate is at 60hz in the Display Setting’s
Advance Menu under the Display Adapter tab. Once that is achieved you can then turn off
the computer and plug your new LCD monitor in
After unpacking your LCD monitor, make sure the following items are included
in the box and are in good condition:
LCD monitor
Power Cord
Monitor-To-PC Analog signal cable 15pin
Monitor-To-PC DVI signal cable
1.5M stereo Jack Audio Cable
User’s manual
¾ DVI- to- YpbPr cable – option
¾ 1.5M RCA jack to stereo jack cable - option
If you find that any item to be missing or appear to be damaged, contact
your dealer immediately. DO NOT throw away the packing material or
shipping carton in case you need to ship or store the LCD monitor in the
future.